ASPEN Silent+ Mini Lime Condensate Removal Pump

The next generation Silent ⁺ Mini Lime has an anti-vibration damper and built-in sound absorbing materials. As well as a quick release reservoir, you can also commission the pump on site, and check operation via the LED system in the reservoir. Silence isn’t golden, it’s lime.

Key Features

• Anti-vibration damper
• Pump sits in trunking elbow
• LEDs provide visual operating feedback

Suitability

• Up to 16㎾ / 54,000Btu/h
• High wall split systems
• Left or right install with range of trunking systems
• Perfect for Commercial use where silence is important

Specifications

• Max. flow: 12 L/h @ 0 head
• Max. rec. head: 10m
• Sound level: 20㏈(A) @ 1m
• Power supply: 230 VAC, 0.1A, 16W, 50/60㎐
• Rated: Non-continuous
• Class: II Appliance
• Max. unit output: 16k㎾ / 54,000 Btu/h
• Max. water temp: 40℃ / 104℉
• Discharge tube: 6㎜ ID
• IP Protection: IP24
• Safety switch: 5.0A Normally closed/open (5.0A volt free with Normally Closed/Normally Open contacts. Default factory set to Normally Closed mode)
• Thermal protection: ✓
• Fully potted: n/a
• Self priming: ✓
• Part number: FP3322/2

In The Box

• Silent+ Mini Lime Condensate Removal Pump (including 1.5m hard-wired power cable)
• Anti-vibration pulse damper, anti-siphon device & 500㎜ discharge tube assembly
• 500㎜ Lime green inlet hose 14㎜ ID
• 40㎜ Vinyl breather tube 6㎜ ID
• Elbow front and back
• 800㎜ Conduit front and back
• Internal conduit sleeve (Slimline system only)
• Gasket (Slimline, Speediduct and Inoac systems only)
• Ceiling plate
• Drain connector kit
• Fixing kit
• Install manual