ToolBox™ Original MS Adhesive & Sealant • 400g • Grey

ToolBox™ is a hybrid moisture curing adhesive and sealant with high grab strength for use in a wide variety of critical adhesive and sealing applications. ToolBox™ cures to form a tough, waterproof seal and will adhere to a wide range of substrates. Its versatility means it can replace most water based and solvent based construction adhesives, polyurethane adhesive and sealants as well as silicones in construction, marine, transport and industrial assembly applications. ToolBox™ is supplied in white, grey and black colours.

Benefits

• Cures to form a permanently flexible and elastic bond
• Rapid skinning and curing
• High bond strength—suited to Professional and DIY, construction, marine and automotive environments
• Primer-free adhesion to wide range of surfaces
• Paintable with most water based paints (Refer painting for alternative systems)
• Interior / exterior—High UV resistance
• Heat resistant to 100℃
• Solvent and isocyanate-free
• Resistant to salt and chlorinated water
• Suitable for bonding wet non-porous substrates (refer Surface Preparation details)
• Shore A: 55±5. Suitable as an anti-pick sealant/adhesive in correctional facilities
• Trafficable sealant
• Suitable for natural stone, blue stone, granite (refer limitations).
  Mould resistant
• Safe on mirrors, except safety backed mirrors

Uses

• Sealing lap joints in box guttering, airconditioning ducts and wet areas
• Adhesive for fixing wall panels to studs, floor boards to joists
• Use in gasket type applications in water tank flanges
• Bonding insulation and decorative panels to solid surfaces
• Re-fixing loose ceramic tiles
• Multiple high performance bonding and sealing applications in transport—trains, buses, special purpose vehicles, caravans, 4 wheel drive trailers etc.
• Adhering and sealing acrylic/ABS shower units
• Adhering end-caps to retaining walls
• Sealing gaps and expansion joints in concrete, brick, mortar, metal and stonework
• ToolBox™ is suitable for Green Building applications requiring VOC of maximum 30g/lt, and meets the requirements of LEED Certification: Indoor Environmental Quality – Credit 4.1 (Low-Emitting Materials: Adhesives and Sealants)